How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or subaru keys replacements dealer, based on how old your subaru key copy is. This is accomplished through the connection of a computer programming machine to your vehicle.

To program your Subaru unlock the driver's door by pressing the door button and then close it. You will hear a chime in the instrument panel, and the dome lights will flash.

Step 1: Locate your transmitter circuit board

There are various ways to program your key fob. First, you should be aware of the type of key fob you own. You can do this by taking a look at the shape of the key fob, or by listening to the car for a chime.

Once you have this information, you can start the process of programming your key fob at home. You will need an aluminum flathead and a key for this. You can open the key fob by twisting it. Then, push the metal key in and release the battery from the tiny tabs that secure it. Replace the battery with a new one, and then put the key fob case back together.

Step 2: Disconnect the key fob case

Change the battery is a smart idea as it could revive key fobs that have stopped working anymore. In some instances, the buttons on the key fob could be broken. If you see that the contacts made of metal on the button have become loose try soldering them back in their place in order to get them back to function properly.

Make sure you turn off your ignition and close your doors prior to you begin. You can do this by closing the driver's door and pressing the door button ten times in quick succession. Then, you should hear the instrument panel chime, and the dome lights will light up. This means that you are in a position to proceed.

Step 3. Insert the key fob into the ignition

There are lots of articles online that give you steps on how to program a new or replacement Subaru key fob at home, but the majority of them aren't specifically formulated. Reprogramming an electronic lock is best done by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors shut and the engine off. Open the door button control and use it to unlock all doors. Open and close the driver's door two times more. Then, insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should sound chirps where to get a subaru key made confirm that the settings have been altered.

Step 4: Turn the Ignition On

It is crucial to understand that this method of programming a key fob only works if you already have a working key. If not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once your key is programmed, you should be able start your car in about five minutes. Begin by closing all doors and shutting off the engine. Next, sit in the driver's seat, and then unlock all doors with the door button control. Insert the key into the ignition, turn it on to the off position (the electrical systems will come on, but the engine will remain off) then return to the off position ten times in rapid succession.

Step 5: Unlock Driver's Door

Subaru provides a variety of high-end cars with key fobs that lock and unlock doors and start the car and defrost the windows. These gadgets can sometimes stop functioning.

Contact a locksmith or dealer to solve the issue. This will resolve the issue and make sure that your car is safe.

To accomplish this, open the driver's door and close it. Place the key in the ignition and then turn it to position 1. Then, turn it back to the off position. Do this as fast as you can ten times. After the tenth repetition you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock buttons on the Driver's Door

If you need to replace subaru key the battery inside the Subaru key fob, the process is simple. Remove the fob's exterior case. Use a flathead for prying the interior case open and then remove the old batteries.

After removing the battery, insert the new one and close the case. Then, get in the driver's seat and unlock all the doors using the door button control. Put the key in the ignition and turn the key to ensure that the electrical system is turned on, but the engine is off. Repeat this 10 times in a row until you hear a chime from the instrument panel. This will put the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The annoying chirp which can be heard when you lock or unlock a Subaru Key Fob Replacement Price Key Fob from the outside of the vehicle is distracting for some owners. In certain instances, you can disable the chirp by opening and shutting all doors while double-clicking the lock button on your key fob.

Switch off the ignition and close all doors, as well as the lid for the fuel-filler. For 10 seconds then press and hold the lock button on the key fob. When this is done the instrument panel will emit an audible chime. The chirp signals that the lid of the fuel-filler door are locked. It is possible to change the setting so that the doors are locked automatically without the need to press a switch.

Step 8: Enter the 8-Digit Transmitter Number

Keep the first 8 digits of the code in your head. Now, climb into your driver's seat, close all doors and turn the ignition to the first position (towards towards). After ten turns your instrument panel will sound at least once.

Next, open the case for the key fob and look for the circuit board of the transmitter inside. The circuit board should have one or two 8-digit numbers. Take note of the sequence that starts with the first number, and follow the instructions in this guide to register the code in the system of your vehicle. For older models, this procedure might require a visit to the dealer.